A scope of work is a written description of exactly what will be repaired, replaced or built on a property, with quantities, materials and finish levels.
A scope of work is the written plan for the renovation. Where the rehab budget says how much, the scope says what: replace roof with architectural shingles including new underlayment and drip edge, remove and replace 1,200 square feet of flooring with luxury vinyl plank, install new shaker cabinets and quartz counters in a 10 by 12 kitchen. Quantities, materials and finish levels belong in it. Vague lines like “update kitchen” are where budgets go to die.
For rehab loans, the scope or contractor bid is one of the documents a buyer gathers for Think Private Lending, alongside the purchase contract, LLC paperwork and bank statements. The lender uses it to confirm the rehab budget is realistic for the house and to set up the draw schedule. A clean scope makes each draw inspection simple, because the inspector can look at the line and look at the work and see whether one matches the other.
A short example shows the difference. A weak scope reads: “Bathrooms, $12,000.” A strong scope reads: “Hall bath: demo to studs, new tub with tile surround to ceiling, new vanity, toilet, fixtures, exhaust fan vented to exterior, $6,500. Primary bath: convert tub to walk-in shower with glass door, new double vanity, tile floor, $7,500.” The second version is $2,000 higher, and it is also the one that will not surprise you halfway through.
Florida adds permit detail to the scope. Window and door replacements in many counties need product approval numbers, and in Miami-Dade and Broward, which sit inside the High-Velocity Hurricane Zone, those standards are stricter still. Roof scopes should call out the nailing pattern and secondary water barrier so the work can earn wind mitigation credits later. If the house is in a flood zone, list every line that counts toward the improvement total so you know where you stand against the FEMA 50% rule before work begins.