Rehab costs

What it really costs to fix a Florida house

The line items that show up on our rehab estimates, with planning ranges and what pushes a job to the top or bottom of them.

typical single-family house

Roof replacement

$12,000 to $30,000

Tear-off, decking repairs, underlayment and a new code-compliant roof covering, priced by the square.

Cost guide →
per central system

HVAC replacement

$7,000 to $16,000

A new condenser and air handler (or heat pump), refrigerant lines, pad, thermostat and permit, with duct repairs priced separately.

Cost guide →
typical single-family house

Electrical panel and rewiring

$2,500 to $18,000

Panel and service replacement, correction of problem wiring, and the GFCI, AFCI and grounding work that follows a permitted upgrade.

Cost guide →
typical single-family house

Plumbing repipe

$6,000 to $16,000

Replacing the water supply lines throughout the house with PEX or copper, including drywall access and patching.

Cost guide →
typical single-family house

Cast-iron drain replacement

$8,000 to $30,000

Camera inspection and replacement or lining of failing under-slab cast-iron drain lines, plus floor and slab repair.

Cost guide →
typical single-family house

Impact windows and doors

$15,000 to $45,000

Impact-rated windows, sliders and exterior doors, or approved shutters, installed under permit with stucco and trim repair.

Cost guide →
per kitchen

Kitchen remodel

$12,000 to $40,000

Cabinets, countertops, sink and faucet, appliances, backsplash, lighting and the plumbing and electrical work that comes with them.

Cost guide →
per bathroom

Bathroom remodel

$8,000 to $25,000

Demolition, waterproofing, tile, tub or shower, vanity, toilet, fixtures, ventilation and the plumbing and electrical behind them.

Cost guide →
typical single-family house

Flooring

$6,000 to $20,000

Removal of old flooring, slab or subfloor prep, and new vinyl plank, tile or refinished terrazzo with baseboards and transitions.

Cost guide →
typical single-family house

Interior paint and drywall

$5,000 to $15,000

Drywall repair and replacement, texture matching, ceiling work and full interior paint on walls, ceilings, doors and trim.

Cost guide →
typical single-family house

Exterior paint and stucco

$4,000 to $15,000

Pressure washing, stucco crack repair, fascia and soffit repair, primer and exterior paint on walls and trim.

Cost guide →
varies by house and finding

Foundation and structural

$3,000 to $50,000 or more

Engineering, crack repair, lintel and beam work, termite-damaged framing, raised-floor pier repair and sinkhole-related stabilization.

Cost guide →
typical single-family house

Mold and water damage

$2,500 to $25,000

Finding and fixing the water source, licensed mold assessment and remediation, drying, removal of damaged materials and clearance testing.

Cost guide →
typical single-family house

Septic and sewer

$4,000 to $20,000

Septic inspection, pumping, tank and drainfield repair or replacement, or sewer lateral repair and city sewer connection.

Cost guide →
typical residential pool

Pool resurfacing and equipment

$6,000 to $20,000

Pool interior resurfacing, tile and coping repair, pump, filter and electrical work, plus screen enclosure repair where needed.

Cost guide →
typical rehab project

Permits and plans

$1,000 to $8,000

Permit fees, drawings, engineering, the recorded Notice of Commencement, inspections and closing out old permits.

Cost guide →

See the addresses. Walk the houses. Close with the money already lined up.

Buyer access is free. Tell us what you buy and where, and we will open the full listings: addresses, photos, access instructions and the financing terms behind each one.