Florida rehab costs

Impact windows, doors and shutters on a Florida rehab

Openings are the weakest point of a house in a hurricane, which is why Florida regulates them and insurers reward protecting them. For investors, the question is how much protection the exit actually requires.

Planning range · typical single-family house$15,000 to $45,000

Match opening protection to the exit

On a flip, impact windows are often a selling point buyers notice immediately, especially in coastal counties where buyers remember recent storms. On a rental, approved shutters can deliver the same insurance credit for far less money, as long as you or the property manager are ready to install them before a storm. On a BRRRR refinance, the appraiser will look at what comparable houses have, so match the neighborhood rather than leading it.

Start by checking what the house already has. Many Florida houses have a mix: an impact slider from a past remodel, original single-pane awning windows, and a garage door with no wind rating. A partial upgrade can make sense, but understand that the strongest insurance credit for opening protection generally requires every opening to be protected, including entry doors and the garage door.

A practical middle path on many rentals is impact glass on the large openings that are hardest to shutter, such as sliders and picture windows, combined with rated panels or accordion shutters on the smaller windows. That mix can reach full opening protection for less than full impact glass. The tradeoff is labor before every storm, so decide who is responsible for putting shutters up and write it into the property management agreement or the lease.

Product approval and the HVHZ

Every window, door and shutter installed in Florida needs to be approved for use in the state. In Miami-Dade and Broward, the High-Velocity Hurricane Zone, products need approval that meets that zone’s stricter testing, and building departments check the approval numbers against the permit. Outside the HVHZ, products carry Florida Product Approval, and coastal areas inside the wind-borne debris region require impact-rated glazing or approved protection.

This is why pricing from a big-box store aisle rarely matches a real quote. The product must carry the right approval and design pressure rating for that house, which depends on its location, exposure and the size of each opening. The installer also has to install it the way the approval specifies, with the right fasteners and spacing. An inspector will check that, and a failed install means rework.

Where the money goes on an opening job

Prices vary by county, the products selected, permit requirements and how many installers are available, and lead times from the factory can stretch after an active storm season. Ask for a schedule along with the price. On Think Off Market listings, opening protection shows up as its own line in the rehab estimate when the lender sized it into the budget, so you can see whether the plan assumed impact glass, shutters or nothing.

  • Glass and frames sized and rated for each opening, with large sliders often costing as much as several windows.
  • Removal of old units, which can damage stucco and expose rotten wood bucks around openings in block houses.
  • Buck replacement, stucco patching and paint around every opening.
  • Entry door and garage door upgrades to rated products when the goal is full opening protection.
  • Permit fees and the engineering documentation the building department may request.
  • Interior trim, sills and drywall returns where the new frame does not match the old one.

Wind mitigation credits after installation

Once openings are protected, a new wind mitigation inspection can document it. The inspector looks for product approval labels or paperwork for each opening and records the protection level. Keep the installer’s product list, approval numbers and the passed permit together. Labels often get peeled off glass by cleaners or painters, and without paperwork the inspector may not be able to give full credit.

The credit matters to anyone paying the premium. On a rental, that is you, and it lowers carrying cost for as long as you own the house. On a flip, it becomes part of the story a listing agent can tell, and the next owner’s insurance quote will reflect it. Either way, ask for the wind mitigation report soon after the final inspection while all the documentation is easy to find.

Deposits, lead times and draw timing

Window and door installers usually require a substantial deposit at order because the products are made to measure. The factory then builds them, which can take weeks or longer. Think Private Lending funds the approved rehab budget in draws as work is completed and verified, so plan your own cash for the deposit and expect the draw for this line after the products are installed and inspected.

Order early in the rehab, as soon as the scope is final, and schedule interior work around the delivery. Do not finish stucco or exterior paint until openings are installed, because removing old frames damages the wall around them. Leave room in the timeline for a re-measure if a buck turns out to be rotten. A missing window delays everything behind it, including your final draw.

Questions that sort out window bids

Ask each installer for the approval number and design pressure rating for every product in the bid, whether bucks are included, who patches stucco and paints, who handles interior trim, how the permit and inspection are managed, and what happens if a measurement is wrong. Verify their contractor license on the state site. Compare like products, because a bid using non-impact glass with shutters is a different scope from full impact glass and should be compared that way.

Finally, ask how the installer handles a product that fails the inspection or arrives damaged. Reputable companies replace and reinstall at their cost and keep the schedule moving. The cheapest bid sometimes belongs to a crew that subcontracts installation and disappears when a frame does not fit the opening. Ask whether their own employees install the products, and ask for addresses of recent permitted jobs you can look up in the building department’s online records.

Straight answers

Questions investors ask

How much do impact windows cost for a Florida house?

For a typical single-family investment house, $15,000 to $45,000 is a reasonable planning range for impact windows and doors. Large sliders, many openings, HVHZ requirements and buck and stucco repair move the number up.

Are hurricane shutters enough for insurance credit?

Approved shutters can qualify for opening protection credit when every opening is covered by rated protection. Ask your insurance agent which documentation they need before choosing shutters over impact glass.

Do I need a permit to replace windows in Florida?

Yes, replacing windows and exterior doors generally requires a permit, and the building department checks product approvals and installation. Unpermitted openings can also cost you the wind mitigation credit.

See the addresses. Walk the houses. Close with the money already lined up.

Buyer access is free. Tell us what you buy and where, and we will open the full listings: addresses, photos, access instructions and the financing terms behind each one.