What sets the price of a Florida roof
Roof surface area, material and the condition of the deck underneath set most of the price. Roofers quote in squares (one square is 100 square feet of roof surface), and a hip roof with several valleys takes more material and labor than a simple gable over the same footprint. Architectural shingle is the usual choice on investment houses. Concrete tile and standing-seam metal cost substantially more, and a house that has tile today often needs tile again because the frame and the street expect it.
The surprise money sits under the shingles. Rotten plywood or plank decking around old skylights, chimneys and satellite mounts gets replaced sheet by sheet, and roofers price that as an add-on rather than a fixed number. Current Florida code also calls for a secondary water barrier and specific nailing on re-roofs, so a cheap bid that skips those items will not pass final. Prices vary by county, materials, permit requirements and how busy roofers are after the last storm, so treat any range as a starting point.
- Pitch and number of stories change labor, staging and safety costs.
- Removing more than one layer of old shingles adds tear-off and disposal charges.
- Flat sections over porches or additions usually need a separate low-slope system.
- Fascia, soffit and gutter repairs are normally extras, not part of the base price.
Insurers ask about roof age first
In Florida, roof age is the first question an underwriter asks, and on an older house it can be the only one that matters. Most carriers want a 4-point inspection on older homes, covering the roof, electrical, plumbing and HVAC, and a roof near the end of its life will fail that report or push the policy toward limited coverage. A retail buyer who cannot get a reasonable policy cannot close with a lender, so the roof you skip becomes the reason your buyer walks.
The wind mitigation inspection is the second report that touches the roof. It records the covering, deck attachment, roof-to-wall connections (clips, single wraps or double wraps), roof shape and secondary water resistance. A new roof installed to current code usually improves several of those categories, which can lower the premium for the next owner or for you as a landlord. Ask the roofer to photograph deck nailing and underlayment during the job so the inspector has proof later.
Shingle, tile or metal on an investment house
Match the material to the exit, not to your taste. On a flip in a neighborhood of shingle houses, a quality architectural shingle is what buyers and appraisers expect, and spending more on metal rarely comes back at sale. In a tile neighborhood, a shingle roof can read as a downgrade to buyers and appraisers. On a long-term rental, metal can make sense because you are the one paying for the next roof and the insurance in between.
Tile jobs carry their own traps. Old clay or concrete tile may be discontinued, so partial repairs rarely match, and the underlayment beneath tile is often the part that failed. Tile is also heavy, and switching from shingle to tile can require an engineer to confirm the trusses carry the load. If a listing shows a tile roof with a modest roof line in the rehab estimate, find out whether it assumes a re-underlay with salvaged tile or a full replacement.
How the roof moves through your draws
On Think Off Market, the roof is its own line in the rehab estimate attached to each listing. Think Private Lending funds 100% of the rehab budget in draws as work is completed and verified, alongside up to 90% of the purchase price, as long as the total loan stays inside its limit against the after-repair value. The roof is usually one of the first draws on a project, because nothing inside the house should be finished until the house is dry.
Roofers typically want a materials deposit up front and the balance at completion. Plan for that: you may cover the deposit, and the draw reimburses the work once the draw inspection confirms the roof is on and the permit shows a passed final. Keep the final inspection result with your draw request. A roof that is installed but not finaled is unfinished in the eyes of everyone who has to sign off on it.
Checking a roofing bid before you sign
A usable roofing bid names the material by manufacturer and product line, the underlayment, drip edge, number of decking sheets included, the per-sheet price beyond that, the permit, and both the manufacturer and workmanship warranties. If any of those are missing, ask before you compare totals. Two bids that look far apart often cover different scopes, and the low one tends to add the missing pieces as change orders once the old roof is off and you have no leverage left.
- Look up the roofer’s Florida license on the state licensing site and match the name to the bid.
- Ask for a certificate of insurance naming your LLC, including workers’ compensation.
- Confirm who pulls the permit and who records the Notice of Commencement.
- Get the per-sheet decking price in writing before tear-off starts.
- Ask whether wall flashing, vent boots and plumbing stack flashing are new or reused.
Roof mistakes that cost flippers money
The costliest roof mistake is buying a house with a tired roof and planning to sell it as is to a retail buyer. That buyer needs insurance and a mortgage, and the 4-point will flag the roof. The flipper then replaces it during a pending sale, at rush pricing, while the closing date slides. Price the roof before the purchase contract is signed and you control both the timing and the contractor.
- Patching a roof with a few years left, then losing the buyer at inspection anyway.
- Picking the lowest bid without matching scope, then paying for decking at whatever price the roofer names.
- Hanging drywall and painting ceilings before the house is dried in, then redoing them after an afternoon storm.
- Skipping a new wind mitigation report after the roof is done, which leaves premium credits unclaimed.