Decide if the pool helps the exit
In many Florida neighborhoods, a pool is something buyers expect, and a house without one competes at a different price. In others, a pool narrows the buyer pool or raises insurance and maintenance costs without adding much value. Look at the comps. If most recent sales with pools sold for more and quickly, the pool is worth restoring. If the comps are mixed, a clean, functional pool at modest cost is the goal rather than a showpiece.
For rentals, a pool raises what tenants will pay in some markets and adds cost everywhere. You need regular pool service, liability coverage that fits a pool and a plan for repairs. Some landlords include pool service in the rent so the pool is maintained properly. Run the numbers both ways before you decide how much to put into it.
Removing a pool is a third option that investors sometimes overlook. Filling in a pool requires a permit, proper demolition of the shell or drilling for drainage, compacted fill and often an engineer’s or inspector’s sign-off so future owners can build over the area. It is rarely cheap, and in pool neighborhoods it usually lowers value. It can make sense on a rental in a neighborhood where few houses have pools and the shell is badly cracked.
Finish options and what they last
On a flip, a quartz finish with new waterline tile is usually a sensible middle choice that looks fresh in photos and gives the buyer years of use. Pebble may make sense in higher price points. On a rental, choose the finish you can afford to maintain. A pool resurfaced cheaply and then neglected by tenants and service providers will look worse in a few years than the original.
Prices vary by county, the finish selected, permit requirements and the availability of pool crews, which can be booked weeks out in spring. Pool size and shape matter too, and freeform pools with steps, benches and attached spas cost more to resurface than simple rectangles of the same volume.
- Standard white plaster, often called marcite, is the least expensive finish and the shortest lived.
- Quartz finishes add aggregate to the plaster and hold up better than plain marcite.
- Pebble finishes cost more and typically last the longest, with a textured feel underfoot.
- Waterline tile and coping are usually priced separately and often need replacement at the same time.
Draining a pool has real risk
Resurfacing requires draining the pool, and in parts of Florida with a high water table, an empty concrete pool can lift out of the ground from groundwater pressure. Pool contractors manage that with hydrostatic relief valves and by timing the work during dry periods. Never let anyone drain a pool without understanding that risk, and never leave a pool empty longer than necessary.
Ask the contractor how they handle groundwater, whether they check the hydrostatic valve and what they do if heavy rain is forecast. A shell that shifts or cracks turns a resurfacing job into a structural repair, which is a far larger cost than anything on this page. Experienced Florida pool contractors handle this routinely, which is one of many reasons to choose experience over price.
The equipment pad and the electrical
The pump, filter, heater if any, timer, valves and electrical connections sit on the equipment pad, and on a neglected house they are often failing or missing. Efficiency rules mean most replacement pumps are now variable-speed models, which cost more to buy but use less electricity. Filters may be cartridge, sand or diatomaceous earth types, and old units may need replacement rather than repair.
Pool electrical needs particular care. Bonding of the pool shell, equipment, ladders and nearby metal, ground-fault protection for equipment and lights, and safe wiring at the pad are inspection items and safety items. If the house has an old pool light, assume it needs attention. Ask an electrician to check bonding when the pool is drained, because some problems are easier to fix when the shell is empty.
Screen enclosures after storms
Many Florida pools sit inside an aluminum screen enclosure, and storms damage them regularly. Torn screens are a simple rescreen job. Bent or broken structural members, rusted fasteners and anchors pulling out of the deck are bigger repairs, and full replacement may require a permit and engineered plans. Insurance and buyers both look at the cage, and a damaged one makes the whole back yard look neglected.
Check the cage closely during your walkthrough: look at corners, the connections at the house and the base anchors. In coastal areas, salt air corrodes fasteners, and replacing them with coated or stainless hardware extends the cage life. Price the rescreen separately from the pool so you can see each number clearly in the budget.
Pool lines on the estimate and in draws
On Think Off Market, the rehab estimate attached to each listing breaks out pool work when it is part of the approved budget. The financing from Think Private Lending pays up to 90% of the purchase price and all of the approved rehab budget, the rehab portion released in draws as work is completed and verified, provided the total loan sits within its limit against the after-repair value. Pool resurfacing usually draws once the finish is applied and the pool is filled and balanced, and equipment draws once installed and running.
Ask each pool contractor to separate resurfacing, tile, coping, equipment, electrical, deck repair and enclosure work, and to state the finish product and warranty. Verify their Florida pool contractor license and insurance. Keep photos of the drained shell before resurfacing, because they show cracks and repairs that buyers or future contractors may ask about.